Sign In | Join Free | My disqueenfrance.com
China ShenZhen Vector Technology Co., Ltd. logo
ShenZhen Vector Technology Co., Ltd.
More Flexible, More Accurate
Active Member

3 Years

Home > Servo Motion Control System >

EtherCAT Servo Motion Control System AC Servo Controller For Cardboard Cap Feeder

ShenZhen Vector Technology Co., Ltd.

EtherCAT Servo Motion Control System AC Servo Controller For Cardboard Cap Feeder

  • 1
  • 2
  • 3

Brand Name : Vector

Model Number : VEC-VC-01233HC-M-E/180MB-4R520A33F-MF2

Certification : CE

Place of Origin : China

MOQ : 1 kit

Price : USD 300-450 / kit

Payment Terms : T/T, Western Union, L/C

Supply Ability : 500 kits/month

Delivery Time : 3-5 work days

Packaging Details : 280*208*78mm

Voltage : 380V

Power : 4.5KW

Rated Current : 12A

Rated Speed : 2000 rpm

Rated Torgue : 21.5N.m

Phase : 3 Phase

Motor flange size : 180mm

Communication Protocols : Modbus/CANopen/EtherCAT

Model : VEC-VC-01233HC-M-E/180MB-4R520A33F-MF2

Application : Cardboard Cap Feeder

Contact Now

EtherCAT/Canopen Bus Type Servo Amplifier Controller For Cardboard Cap Feeder

EtherCAT/Canopen Bus Type Servo Amplifier

AC Power 380V 4.5KW

Three phase with 17/23bit Tamagawa absolute encoder;

Modbus/CANopen/EtherCAT Commucation Protocol Type

Products Description

Products AC Servo Drive Controller For Cardboard Cap Feeder
Brand Vector
Model No. VVEC-VC-01233HC-M-E/180MB-4R520A33F-MF2
Power 4.5KW
Voltage 380V
Phase Three Phase
Rated Speed 2000 rpm
Rated Current 9.5A
Rated Torgue 21.5N.m
Communication Protocols Modbus/CANopen/EtherCAT

EtherCAT Servo Motion Control System AC Servo Controller For Cardboard Cap Feeder

Key Name Key function
Mode mode switch, return to the previous menu
▲(add) increase flashing bit value of the LED digital tube
▼(dec) Decrease flashing digit value of the LED digital tube
◄◄(shift) Moves the blinking LED tube to the left; checks the high value of data
longer than 5 bits; Fault reset;execute Fn function
SET read/write parameter values


Installation:

● Install the driver on a dry and sturdy platform. Maintain good ventilation and

heat dissipation during installation and maintain good grounding.

● Please install in the specified direction to avoid malfunction.

● When installing, please ensure that the servo driver is kept at a specified

distance from the inner surface of the cabinet and other machines, otherwise it may cause fire or malfunction.

EtherCAT Servo Motion Control System AC Servo Controller For Cardboard Cap Feeder

Installation
Environment
Requirements
Atmospheric Pressure 86~106kPa
Mbient Humidity 0~55℃
Ambient Temperature 0~90%RH
IP Rating IP20
Vibration 0~4.9m/s^2

● When installing, do not block the suction and exhaust ports, and do not allow foreign objects inside the product

to enter, otherwise it may cause malfunction or fire due to aging of internal components.

● Do not place heavy objects on or under this product as this may result in injury.

● Please install in the following environment:

1.places without direct sunlight;

2.Locations where the ambient temperature is in the range of 0 ° C to 55 ° C;

3.Relative humidity in the range of 0% to 95%, and no condensation;

4.Locations free of water droplets, vapors, dust and oily dust;

5.Locations where there is no high heat device;

6.Non-corrosive, flammable gas and liquid sites;

7.It is not easy to splash water, oil and medicine;

8.places that are not exposed to radioactive radiation;

9.Strong and vibration-free places;

10.Locations where there is no electromagnetic noise interference.

Wiring precautions

● It is recommended not to use single-phase 220V for main power supply,

which may cause damage to electrolytic capacitor due to lack of phase.

● Do not change the wiring during power-on, otherwise it may cause electric shock or injury.

● Please perform wiring or inspection by professional technicians, otherwise it

may cause electric shock or product failure.

● Please carefully confirm the wiring and power supply. The output circuit

may be short-circuited due to wiring errors or application of different voltages. The brake does not operate

when the above fault occurs, which may result in mechanical damage or personal injury.

● Do not connect the input power cable to the U, V, and W terminals of the

drive. Otherwise, the servo driver will be damaged.

● When wiring, do not pass the power cable and signal cable through the same pipe, and do not bundle them

together. The distance between the two should be more than 30cm to avoid interference.

● The driver ground terminal must be grounded to avoid leakage and reduce the interference of the system,

and the diameter of the ground wire should be the same as or above the power supply line.

● When connecting the AC power supply and DC power supply to the servo unit, connect to the specified terminal.

Failure to do so may result in malfunction or fire.

● For the wiring length, the command input line is up to 3m and the encoder line is up to 20m.

● Use a twisted-pair shielded cable for the signal cable and encoder cable, and ground the shield with a single end.

●The U, V, W terminals of the driver and the U, V, and W terminals of themotor should be connected one by one

according to the name. If it is wrong connected, the motor cannot operate normally.

● Common DC bus products require pressure sensitive resistors and the wiring is secure.

● Please check the power after the power is off for at least 5 minutes. Even if

the power is turned off, high voltage may remain inside the servo drive. Therefore, do not touch the power terminal

within 5 minutes after the power is turned off, otherwise it may cause electric shock.

● Do not turn the power ON/OFF frequently. When it is necessary to continuously turn ON/OFF the power, please

control it once or less in 1 minute. Since the power supply section of the servo driver has a capacitor, a large charging

current (charge time of 0.2 seconds) flows during the ON/OFF power supply. Therefore, if the power is turned ON/OFF

frequently, the performance of the main circuit components inside the servo driver will be degraded.

● Do not apply power when the terminal block screws are loose or the cable is loose. Otherwise, it may cause fire.

● Take appropriate shielding measures in the following locations, otherwise the machine may be damaged:

1. Locations that cause interference due to static electricity;

2. A place that produces a strong electric field or a strong magnetic field;

3. Locations where there may be radiation radiation;

4. A place with a power cord nearby.

Accessories:

Accessory name Image
Satandard Spare Parts Power terminal EtherCAT Servo Motion Control System AC Servo Controller For Cardboard Cap Feeder Adapt to E1,E2 structure drive
Cn3 encoder plug Encoder plug on the driver side
Cn4 control terminal plug Input/output signal terminals,user wiring
Encoder connection line The standard cable length is 3, 5, 8, 10, 13, 15 meters, according to customer
needs Provide independent connector
Power line The standard cable length is 3, 5, 8, 10, 13, 15 meters, according to customer
needs Provide independent connector
Drive monitoring line Connect and adjust the software for remote monitoring and firmware update
Purchasing Spare Parts USB to RS232 Adapter cable If necessary, self purchase
Ethernet communication line If necessary, self purchase

Packing:

Packing details of Servo Drive
Products E1(3-6A) E2(7-12A) E3(16-27A) C015(32-38A) C022(45-60A)
Ctn. Size 280*208*78 280*208*112 375*290*155 440*296*288 510*305*325
Packing details of Motion Controller
Products VA Motion VA Expansion VE Motion VE Expansion(32) VE Expansion(76)
Ctn. Size 176*165*78 127*75*70 144*128*69 176*164*78 316*164*78

EtherCAT Servo Motion Control System AC Servo Controller For Cardboard Cap Feeder

Delivery Time and Shipping Way

Quantity 1-5 kits 50-100 kits 200-500 kits
Delivery time Within 3 days 5-10 days 15-25 days

1. For small order we always can delivery out within 1 week.

2. Our products can be shippied via Air, Land or Sea.

Cetificates:

1. CE (EU Safety Standard);
2. IEC/EN61800-5-1:2007 (Safety requirements for electrical, thermal and energy in Section 5-1 of the

variable speed electric driver system), corresponding to the national standard GB12668.501-2013;

3, IEC / EN61800-3: 2004 + A1 (speed control electric driver system part 3 electromagnetic compatibility

standards and its specific test methods), corresponding to the national standard GB12668.3-2012.

EtherCAT Servo Motion Control System AC Servo Controller For Cardboard Cap Feeder

Our Team

EtherCAT Servo Motion Control System AC Servo Controller For Cardboard Cap Feeder


Product Tags:

2000rpm Servo Motion Control System

      

EtherCAT Servo Motion Control System

      

EtherCAT AC Servo Controller

      
China EtherCAT Servo Motion Control System AC Servo Controller For Cardboard Cap Feeder wholesale

EtherCAT Servo Motion Control System AC Servo Controller For Cardboard Cap Feeder Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: ShenZhen Vector Technology Co., Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0